For the use of a variety of dental applications, this plaster offers smooth surface, very fine detail and high strength. The core characteristics of this product are to provide compressive strengths up to 900 kg/cm² and high hardness, together with a very fine grain.
ALSTON
This plaster has a water-mixing ratio of 100 gr Alston / 24 - 26 gr water and provides very smooth surface for dental models due to its fine-grained nature. It has low expansion, fast hardening and high strength qualities. It sets quickly.
Yellow, blue, white and pink colors are available.
Instructions for use: (In 20 °C room temperature)
Mixing proportions: 100 gr. Alston + 26 ml water.
Soaking time: 30 seconds
Manual mixing time: 1.5 minutes
Mechanical mixing time: 1 minute
Pouring time: 6 minutes
Setting start: 7 minutes
End of set: 9 minutes
Hardening time: 30 minutes
Physical Properties:
Hardness:
*-After 1 hour: 90 kg/ cm²
*-After 2 hours: 150 kg/ cm²
*-After 24 hours: 600 kg/ cm²
*-Final hardness: 800 kg/ cm²
Expansion: % 0.15
Availability:
In 1 and 2 Kg. plastic bags
DENSTON
This plaster has a water-mixing ratio of 100 gr Denston/ 20 - 22 gr water and provides a very smooth surface for dental models due to its fine-grained nature. It has lower expansion and higher strength characteristics than ALSTON. It also sets and hardens faster.Light brown color is available.
Instructions for use: (In 20 °C room temperature)
Mixing proportions: 100 gr. Denston + 22 ml water.
Soaking time: 30 seconds
Manual mixing time: 1.5 minutes
Mechanical mixing time: 1 minute
Pouring time: 6 minutes
Setting start: 7 minutes
End of set: 9 minutes
Hardening time: 30 minutes
Physical Properties:
Hardness:
*-After 1 hour: 150 kg/ cm²
*-After 2 hours: 250 kg/ cm²
*-After 24 hours: 900 kg/ cm²
*-Final hardness: 1,100 kg/ cm²
Expansion: % 0.12
Availability:
In 1 and 2 Kg. plastic bags.